Saniflo SaniCubic 1 1HP 115-Volt Grinder Pump (089)

The SaniCubic 1 is a pre-assembled heavy-duty simplex grinder pump that meets the demanding needs of commercial and residential sewage applications. The grinder system made of stainless steel liquefies solids into small particles prior to being passed through the 1-1/2 in. discharge. It is designed to handle multiple waste fixtures for applications such as residential single or group homes, commercial buildings, schools and many more. This new system consists of a 1 HP motor housed inside a compact but highly durable plastic enclosure. The motor has a high-performance grinding system and a fast-rotating cutting blade to reduce solids in the wastewater stream from toilets, tubs and showers, sinks, washing machines, dishwashers, etc. The SaniCubic 1 operation is as simple as the installation. The effluent enters the pump through 1 of 4 different inlets - 1 on either side of the unit at the bottom and 2 along the top. The inlets can accommodate 1-1/2 in. or 4 in. of diameter pipes. As soon as the wastewater level reaches the trigger point, the pumping system activates. The effluent is then pumped out through 1-1/2 in. of diameter rigid pipe connected on the top of the pump. Maximum pumping distances are 36 ft. vertically and/or 328 ft. horizontally. The inside of the SaniCubic 1 comprises of a couple of pressure switches and a circuit board assembly, which starts and stops the unit, a powerful motor, which drive the stainless steel cutting blade and the pump. Highlights Features Details Amperage (A)10 A Cord Length (ft.)0 ft Discharge Flow @ 0 ft. (gallons/hour)50 Discharge Flow @ 0 ft. (gallons/min)0.83 GPM Discharge Flow @ 10 ft. (gallons/hour)2700 Discharge Flow @ 10 ft. (gallons/min)45 GPM FeaturesSolids Handling,Thermal Overload Protection Housing MaterialThermoplastic Impeller MaterialOther Maximum Horsepower (hp)1 Maximum Pressure (PSI)0 PSI Maximum Working Temperature (F)158 Minimum working temperature (F)40 Outlet ConnectionClamp end Product Weight (lb.)45 lb Pump Switch TypeDiaphragm Vertical Lift (ft.)45 Voltage115v Warranty / Certifications Certifications and ListingsCSA Listed Manufacturer Warranty2 years prorated Dimensions Product Depth (in.)16.75 in Product Height (in.)14.25 in Product Width (in.)21.25 in Product identification BrandSaniflo Model089 Product photos

Actual Solids Capacity2 in.

Minimum Sump Basin Diameter18 or More

• Compatible with commercial and residential sewage applications
• Designed for discharging wastewater
• Cutting blade efficiently grinds organic waste
• SaniCubic 1 can be retrofitted into an existing sewage ejector basin of at least 24 in. in diameter for a quick and easy pump exchange; as this is considered a "plug and play" device, no chains or floats are needed
• Note that the effluent pipe leading into the pump has to be installed with the required 1/4 in. per foot gravity flow; there must be a 10 in. of height difference (from pump to connecting fixture) if the drain is connected to the bottom inlet
• Wastewater from other sanitary fixtures is discharged into the SaniCubic 1 via four 1-1/2 in. or 4 in. inlets, on either side of the housing and on the top of the enclosure; the internal discharge pipe comes equipped with a check valve that prevents back flow into the unit; isolating valves (ball, gate valves) must be installed on waste inlets and on the discharge pipe to ensure that any service/maintenance may be carried out safely
• Unit has been designed with a 1-1/2 in. vent connection on the top of the enclosure; all plumbing codes require connection to a vent system; please note that the vent system should be a 2-way air vent; the use of mechanical vents, air admittance valves or similar devices are not permitted as these are considered 1-way air vent systems